Product Information
Introducing the Most Advanced Branding Iron Heater System on Earth.
With Gearheart’s SmartBrand Branding System, you’ll never have to worry about over or under-heating your branding irons again. No more using analog voltage controllers to guess the correct temperature. Our branding iron heater set uses a closed-loop feedback system to heat your brand to the specified temperature every time. The TC-5 Digital heat controller keeps the heat within a few degrees. Not using it? It saves power. Using it a lot? It cranks up the juice. Fast. Easy. Consistent. Choosing the only branding iron heater with a brain is a no-brainer.
The SmartBrand Branding System can run individual plates as large as 25in² (to find your surface area, multiply the height of your logo by the width). And it runs small plates just as easily!
Branding Heads for the SmartBrand Branding System
Not sure if you need your branding iron set to include aluminum or brass? We make our removable branding heads from a solid bar of aircraft-grade 6061-T6 aluminum alloy or ultra-tough brass alloy; they are not cast or molded. Both materials produce identical results as far as sharpness and detail. Go for aluminum if you plan to use your branding iron occasionally but if you need something tougher for a professional environment, go for brass.
The stainless-steel handle of the electric branding iron is topped with a comfortable hardwood grip, so you can make your mark easily! All components are made right here in the U.S.A.
Branding Iron Set for Wood, Leather, Food and Plastic
Our brands are primarily designed to be used on wood, but they can also be used on leather, food and other soft materials, such as plastic. However, your plate needs a deeper relief when used on these surfaces. Keep that in mind when placing your order.
Voltage for the Branding Iron Heater System
Please note our Electric Irons are only sold within North America.
The standard voltage is 120V, 60Hz. Our irons are designed to operate on 110-120V, either AC or DC. The plug is a standard 3-pronged US plug (NEMA 15-5).
Make your Mark with Electric Branding Irons Sets
Give your work a professional touch with our custom electric branding iron and leave a mark that will never fade away. Upload your design or make one in our free online design tool, and we’ll create the design with your artwork!
Our SmartBrand Branding Iron Set Includes:
- Electric Custom Branding Iron
- TC-5 Digital Heat Controller
- Stainless Steel Handle, with a Hardwood Grip
SmartBrand Branding Iron System Features
- Custom made per your specifications
- Cut with a standard relief (for wood) or a deep relief (for wood, food, leather and plastic)
- Made from aluminum or brass
- Standard voltage is 120V, 60Hz
- Interchangeable with our custom leather stamps
- Made in the U.S.A. TC-5 Digital controller contains imported material.
At Gearheart Industry, we pride ourselves on providing top-notch service to our valued customers. We offer unbeatable repairs for our branding irons, ensuring they remain in excellent condition and deliver consistent results. For just $19.99, our expert technicians will inspect, repair, and fine-tune your branding iron, guaranteeing its optimal performance.
Customer Reviews 5 (3 Reviews) Write a review of this product
Most Excellent Wood Stamp
The stamp and heating control is of high quality. It produces a very crisp, clear emblem on my pieces which exceeds my expectation. The ordering process was very simple and the finished product shipped promptly as promised. I highly recommend and will buy from Gearheart Industry again.
SmartBrand Branding System
We are still getting used to the branding system, as we just received it. So far we are very happy with it. We do wish that the power supply could be transferrable between the drill press and the handheld iron. But, all in all, very happy with the customer service and the product!
Upgraded to the SmartBrand Branding System
Hey, I just upgraded my branding iron. Originally had the torch heated iron, which worked ok, but this SmartBrand iron is amazing. It heats much faster, gives better results and I think it’s a little safer. I would definitely recommend this system to anyone who has to do bulk branding.
