Need to add another heater to your branding setup so you can run multiple plates at one time?  Want to upgrade your torch-heated branding iron to electric?  This is what you need.  This is the heater only and does not include a plate or plate mounting stud.

What Wattage Do I Need?

Your plate size determines the wattage!  Plates under 4in² (2" x 2", 1" x 4", etc) need a 150W iron.  Plates larger than this need a 250W.  I'm feeling somewhat salty while I'm writing this, so I want to make sure you're understanding the whole "square inches" thing.  A plate that is 4" x 4" is not 4in², it's 16in².  You multiply the length times the width.  Anyway, rant over.  If you're replacing an old heater, the 250W heaters have "250" or "GH250" engraved on the brass nose right near the assembly screws.  150W heaters are unmarked.

Call or email if you have any questions about this.  

 

Gearheart Industry

Electric Branding Iron (Heater Only)

$160.00
$160.00
Wattage
249 Items in Stock Free Shipping on Orders Over  $500

Need to add another heater to your branding setup so you can run multiple plates at one time?  Want to upgrade your torch-heated branding iron to electric?  This is what you need.  This is the heater only and does not include a plate or plate mounting stud.

What Wattage Do I Need?

Your plate size determines the wattage!  Plates under 4in² (2" x 2", 1" x 4", etc) need a 150W iron.  Plates larger than this need a 250W.  I'm feeling somewhat salty while I'm writing this, so I want to make sure you're understanding the whole "square inches" thing.  A plate that is 4" x 4" is not 4in², it's 16in².  You multiply the length times the width.  Anyway, rant over.  If you're replacing an old heater, the 250W heaters have "250" or "GH250" engraved on the brass nose right near the assembly screws.  150W heaters are unmarked.

Call or email if you have any questions about this.  

 

Custom Electric Branding Irons

Professional handheld electric branding irons for wood, leather, cork, rubber, and plastic. Custom logo branding systems made in the USA with interchangeable plate compatibility.

Need help with a design or have a question? Reach out to our team and we'll guide you through the process!

American Made

Premium Quality

Fast Turnaround

Trusted by leading brands

Matt

I love my Gearheart Industry brand! I manufacture custom wooden spearguns, and the brand allows me to mark each one with a clean, crisp logo. The heavy duty brass brand is machined extreamly well and attached to an heirloom quality tool handle. As a woodworker, im admitadly a bit of a tool snob. This one passes with flying colors.

Matt

Ocean State Spearguns

David P.

My logo has a lot of very small letters in it, and I was skeptical if it would show up crisply with a brand, but it really does, and looks super professional and precise. Many makers fear the branding stage because bad equipment can ruin a piece that's so close to the finish line, but with Gearheart's brand I look forward to it because it's so satisfying and fun to apply a brand with confidence.

David P.

Making Wood Dust

Jeff Eccleston

I trust Gearhart Industry for all of my torch heated brands. Their detail is razor sharp, turnaround is lightning fast, and the entire process is effortless. Absolute pros — and a pleasure to work with every time.

Jeff Eccleston

Campfire Clubs

Stetson Mumma

When I was looking for an efficient yet classy way to leave my mark on every piece I create, I did my homework. The name that kept coming up was Gearheart Industry — the level of detail they captured in my logo is incredible, and every burn is clean, crisp, and consistent — like a print, but permanent.

Stetson Mumma

White Water Wood Company